WB B2 Digital Boost Display Gauge (Blue)

Description

WB WIDEBAND
WB B2 Boost Gauge - Blue
Free Shipping
WIDE-BAND.com since 2011
WB B2 Digital Boost Display 52mm (2") Gauge (Blue)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
PLEASE ADD A NOTE ON YOUR ORDER ABOUT THE LED DISPLAY COLORS (BLUE or WHITE) YOU PREFER. IF NOT, WE WILL SHIP AS DEFAULT (BLUE) COLORS.
Item Description:
WB B2 LED Display colors available: BLUE
Faceplates can be BLACK (default) or WHITE
Item Specifications:
B2 boost gauge features:
1 – Displays boost in 0.1 PSI (60 PSI max) and to display vacuum in 1 In.Hg (-30 In.Hg max) increments
2 - Sweeping RED LED "needle" boost indicator from o to up to 60 PSI and single BLUE LED vacuum light
3 – Pre-assembled plug and play cable harness with built-in sensor on the gauge
4 - Black or white faceplate option
5 - Multiple outputs for digital (to PC) and 0-5V analog (to data logger / EMS)
6 - No need a PC or tablet for programming upper/lower limits and other settings
7 – LED display has day light sensor to adjust the intensity automatically
Simple Installation
Find a vacuum source on the intake manifold side and connect it to the hose fitting provided. If needed, secure the hose with hose clamps or tie zips.
CALIBRATION
Turn it on while you hold the switch at the back and release afterwards. It should calibrate by itself.
When the Over Boost Warning Limit is reached all RED LEDs will flash
WIRING
WB B2 has a 4ft output cable (4 cables / green-white-red-black).
Red power cable goes to a switched 12V source which comes ON when the ignition is ON. Please use a minimum 2A fuse with the connection.
Black cable goes to a grounded source such as battery ground (-) post.
Green digital output is 9600 8N1 serial that can be connected to your PC.
If you want to connect other devices such as data loggers, you can use white analog cable for 0-5V output.
The cable (8ft) and the vacuum hose should be routed in a way so that there would not be any contact extreme heat sources to prevent damage.
In The Box:
B2 gauge assembly, pre-assembled output cables and vacuum hose. B2 assembly includes black bezel, WHITE or BLACK faceplate and LED display. 10PSI and 60PSI faceplates are sold separately.
Shipping
Returns
Disclaimer
Shipping
Returns
Disclaimer
We offer FREE shipping on all orders!
Your order will be shipped within 2 working days of receiving payment (Monday-Friday) and you should expect to receive it two or five days after shipment.
LIMITED WARRANTY
APSX WIDEBAND warrants this product to be free from defects for 12 months from the date of purchase. APSX WIDEBAND’s obligation under warranty shall be limited to repairing or replacing, under the discretion of APSX WIDEBAND, any part proven defective. This warranty is limited to the repair or replacement of parts in the manufactured good and the necessary labor done to affect its repair or replacement.
SERVICE UNDER WARRANTY
In the unlikely event that your APSX WIDEBAND hardware should fail during the warranty period, a Return Material Authorization number (RMA) must be first retrieved from APSX WIDEBAND. Support can be contacted through email: at wide-band.com. All serviceable goods must be packaged securely, RMA number, with all shipping charges prepaid and shipped to APSX WIDEBAND. Goods returned under warranty must be received by APSX WIDEBAND within ten (10) business days after the RMA number has been issued. Goods received after this period is subject to fees for the service of repair or replacement.
CONDITIONS FOR WARRANTY VOID
This warranty shall terminate and APSX WIDEBAND shall have no obligation pursuant to it if (1) your product has been modified or repaired in a manner not previously authorized by APSX WIDEBAND in writing,, (2) your product was subjected to accident, abuse, shipping damage, or improper use; (3) your product was not used or configured as specified in the this manual; or (4) your product was subjected to operating conditions more severe than those specified in the this manual.
APSX WIDEBAND shall not be liable for direct, special, incidental, or consequential damages resulting from any legal theory including, but not limited to, lost profits, downtime, goodwill, damage, injury to persons, or replacement of equipment and property due to improper installation, integration and/or misuse of any APSX WIDEBAND’s product(s). This warranty applies to the original purchaser of product and is non-transferable. All implied warranties shall be limited in duration to the said 90 day warranty period.
TERMS OF USE
APSX WIDEBAND does not guarantee the product functionality with any ECU, data logger or other devices that uses the output signals. Implementation and integration of the product with any other device(s) must be done at your own risk. Improper installation and usage may lead to engine damage. Mount and install the product in a location where it does not obstruct the driver’s view and/or ability to safely control the vehicle.
Click here to see description
APSX WIDEBAND
APSX B2 Boost Gauge - Blue
Free Shipping
WIDE-BAND.com since 2011
APSX B2 Digital Boost Display Gauge (Blue)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Item Description:
APSX B2 LED Display colors available: BLUE (default), RED
Faceplates can be BLACK (default) or WHITE
IF THERE IS NO NOTE ON THE ORDER, IT WILL BE SHIPPED AS DEFAULT.
Item Specifications:
B2 boost gauge features:
1 – Displays boost in 0.1 PSI (60 PSI max) and to display vacuum in 1 In.Hg (-30 In.Hg max) increments
2 - Sweeping RED LED "needle" boost indicator from o to up to 60 PSI and single BLUE LED vacuum light
3 – Pre-assembled plug and play cable harness with built-in sensor on the gauge
4 - Black or white faceplate option
5 - Multiple outputs for digital (to PC) and 0-5V analog (to data logger / EMS)
6 - No need a PC or tablet for programming upper/lower limits and other settings
7 – LED display has day light sensor to adjust the intensity automatically
Simple Installation
Find a vacuum source on the intake manifold side and connect it to the hose fitting provided. If needed, secure the hose with hose clamps or tie zips.
CALIBRATION
Turn it on while you hold the switch at the back and release afterwards. It should calibrate by itself.
When the Over Boost Warning Limit is reached all RED LEDs will flash
WIRING
APSX B2 has a 4ft output cable (4 cables / green-white-red-black).
Red power cable goes to a switched 12V source which comes ON when the ignition is ON. Please use a minimum 2A fuse with the connection.
Black cable goes to a grounded source such as battery ground (-) post.
Green digital output is 9600 8N1 serial that can be connected to your PC.
If you want to connect other devices such as data loggers, you can use white analog cable for 0-5V output.
The cable (8ft) and the vacuum hose should be routed in a way so that there would not be any contact extreme heat sources to prevent damage.
In The Box:
B2 gauge assembly, pre-assembled output cables and vacuum hose. B2 assembly includes black bezel, WHITE or BLACK faceplate and Red or Blue LED display. 10PSI and 60PSI faceplates are sold separately.
Shipping
We offer FREE shipping on all orders!
Your order will be shipped within 2 working days of receiving payment (Monday-Friday) and you should expect to receive it two or five days after shipment.
Returns
LIMITED WARRANTY
APSX WIDEBAND warrants this product to be free from defects for 12 months from the date of purchase. APSX WIDEBAND’s obligation under warranty shall be limited to repairing or replacing, under the discretion of APSX WIDEBAND, any part proven defective. This warranty is limited to the repair or replacement of parts in the manufactured good and the necessary labor done to affect its repair or replacement.
SERVICE UNDER WARRANTY
In the unlikely event that your APSX WIDEBAND hardware should fail during the warranty period, a Return Material Authorization number (RMA) must be first retrieved from APSX WIDEBAND. Support can be contacted through email: at wide-band.com. All serviceable goods must be packaged securely, RMA number, with all shipping charges prepaid and shipped to APSX WIDEBAND. Goods returned under warranty must be received by APSX WIDEBAND within ten (10) business days after the RMA number has been issued. Goods received after this period is subject to fees for the service of repair or replacement.
CONDITIONS FOR WARRANTY VOID
This warranty shall terminate and APSX WIDEBAND shall have no obligation pursuant to it if (1) your product has been modified or repaired in a manner not previously authorized by APSX WIDEBAND in writing,, (2) your product was subjected to accident, abuse, shipping damage, or improper use; (3) your product was not used or configured as specified in the this manual; or (4) your product was subjected to operating conditions more severe than those specified in the this manual.
Disclaimer
APSX WIDEBAND shall not be liable for direct, special, incidental, or consequential damages resulting from any legal theory including, but not limited to, lost profits, downtime, goodwill, damage, injury to persons, or replacement of equipment and property due to improper installation, integration and/or misuse of any APSX WIDEBAND’s product(s). This warranty applies to the original purchaser of product and is non-transferable. All implied warranties shall be limited in duration to the said 90 day warranty period.
TERMS OF USE
APSX WIDEBAND does not guarantee the product functionality with any ECU, data logger or other devices that uses the output signals. Implementation and integration of the product with any other device(s) must be done at your own risk. Improper installation and usage may lead to engine damage. Mount and install the product in a location where it does not obstruct the driver’s view and/or ability to safely control the vehicle.