Jeep D-300 STAINLESS twin-stick shifter W/BOOT PND300J

Description

Made for the Jeep Dana 300 transfer case (5/8" pivot bolt)
Parts are machined or laser-cut from 304 stainless steel, then the welds are bead blasted, and the handles are polished
Our shifters don't need paint since that are all stainless, we put the stainless where you need it, under your rig.
This transfer case shifter works equally as well with automatic and manual transmissions, is especially good for applications where the "one size fits all" twin-stick shifter puts the shifter handles up under your dash!
The location of the shifter handles are above and just slightly forward of the shifter pivot bracket on the transfer case.
These shifters are designed to be rock-solid you won't find any "one size fits all" erector set lookin' brackets held together with ny-lock nuts that are not designed for heat. We use only, all metal, mechanical self-locking hardware.
This shifter comes with installation / adjustment instructions, boot, chrome ring, shift pattern decal, and even stainless steel screws to finish it off!
Note: Not all installations / applications are the same, some floor trimming or shifter adjustment might be necessary.
Shipping is actual charge (No B.S. packaging / handling fees)
MADE IN THE U.S.A.
Find out more
JB Custom Fabrication
*except the hardware
Powered by
eBay Turbo Lister
The free listing tool. List your items fast and easy and manage your active items.