Control Arms Front Upper 2-4" Lift For 1999-2006 Escalade Silverado Sierra Tahoe

Description

J
-Power USA
Control arms upper front pair
for 2-4" Lifted Trucks
Fitment:
2002-2006 Cadillac Escalade
2003-2006 Cadillac Escalade ESV
2002-2006 Cadillac Escalade EXT
2002-2006 Chevrolet Avalanche 1500
2003-2011 Chevrolet Express 1500
1999-2006 Chevrolet Silverado 1500
2000-2006 Chevrolet Suburban 1500
2000-2006 Chevrolet Tahoe
2003-2014 GMC Savana 1500
1999-2006 GMC Sierra 1500
2000-2006 GMC Yukon
2000-2006 GMC Yukon XL 1500
Please read before purchase to make sure these control arms are right for your application
What these control arms
DO
:
When lifting your truck or SUV the ball joint angle is changed causing binding and/or loss of full articulation. These arms have an altered ball joint angle for 2-4” lifts so that full motion is achieved again therefore increasing the lifespan of the ball joint.
They only fit on 1500 series ½ ton trucks and SUVs
They only fit on models with cast steel control arms, see vehicle chart below
What these control arms
DON’T
do:
They do not adjust camber or caster
They do not increase or decrease the length of the arm, they are the same length as the factory arms
They do not prevent the arm from hitting the coil springs. If your existing arms hit the coils, so will these.
They do not work with spindle lifts
They do not work on HD model trucks
They do not change/alter the droop stop (bump stop) clearance
They do not work on stamped steel or forged aluminum control arms
They do not improve ride quality, it will maintain existing ride quality
These control arms replace the factory upper front control arms on the 1/2-ton GM trucks and SUVs that have a 2-4" lift. When lifting your truck the factory control arm ball joints may bind, causing premature wear. These control arms have an altered ball joint angle so that the ball joint can move around freely again. J-Power USA crafted these using heavy duty SAE-AISI 1020 steel CDS tubing (1.3" actual diameter) with head duty replaceable ball joints. All the joining parts are welded by hand by our talented welders to offer strong, reliable and consistent welds. The bushings are hard rubber to offer an OEM ride feel. A semi gloss powder coat is applied to protect the metal from the elements. This kit comes in 2 pcs to accommodate both upper front arms on the left and right sides of the vehicle.
Professional installation highly recommended.
Lifetime warranty on the metal structural components of the arms and 1 year warranty on the bushings and ball joint.
Fitment:
2002-2006 Cadillac Escalade
2003-2006 Cadillac Escalade ESV
2002-2006 Cadillac Escalade EXT
2002-2006 Chevrolet Avalanche 1500
2003-2011 Chevrolet Express 1500
1999-2006 Chevrolet Silverado 1500
2000-2006 Chevrolet Suburban 1500
2000-2006 Chevrolet Tahoe
2003-2014 GMC Savana 1500
1999-2006 GMC Sierra 1500
2000-2006 GMC Yukon
2000-2006 GMC Yukon XL 1500
Dust cover and grease fitting on ball joint. Ball joint is replaceable.
Material: SAE 1020 steel CDS tubing, rubber bushings
Finish: Black semi-gloss powered coated
Weight: 7.6 lbs [3.45 kgs] each arm
Condition: 100% Brand New
Warranty:  Lifetime warranty on the structural metal control arm, 1 year warranty on the rubber bushings and ball joints
Quantity:  consists of 2 arms, installation instructions not included
- professional installation highly recommended
Original shipping and handling charges are non-refundable
No returns for refund once item has been installed
Insurance is included in the shipping and handling price
Return for refund within 30 days if new and uninstalled less a 15% restocking fee at our discretion. Return for exchange within 30 days of reception if new and uninstalled. No returns or exchanges after 30 days. We are
not responsible for return shipping cost.
Powered by SixBit's eCommerce Solution
Powered by SixBit's eCommerce Solution