Air Compressor, 2000psi, 3.5CFM, Gas, Stewart, AN-M4C, High Pressure, TESTED

Description

Air Compressor, 2000psi, 3.5CFM, Gas, Stewart, AN-M4C, High Pressure, TESTED
This is a high pressure air compressor made by Stewart Warner South Wind, model 3260101-6 (AN-M4C). The 2000 psi output makes this a great compressor for filling paintball tanks or other compressed air cylinders. This does not have a filter for breathing air installed, however the purchaser could easily install one. Hollow tubular aluminum and steel framework contributes to a light weight 65 lb assembly, easily moved around by one person. This could run at higher pressures if the water separator and relief valve were replaced with higher pressure units.
This unit does not include the upper aluminium cage normally found on this compressor.
Compressor:
Reciprocating piston type
2000 psi @ 3600 rpm
3 stage
Aftercooler
Relief valve: set to 2250 psi
Water separator
Gasoline motor:
Model 1A08111
1.5 hp @ 3600rpm
3600 rpm max
Adjustable throttle
Single cylinder
Pull start
NSN: 4310-00-078-5431
Click to see test video.
Specifications:
MFG:       Stewart Warner South Wind
Model:     3260101-6
Serial:
Volts:
Amps:
Phase:
Year:
Drive:
Controls:
Manuals:
Air:
Weight:   65 Lbs
Condition: Used
Length:   17
Width:     23
Height:    19
All dims inches unless otherwise noted
Inventory #: 7564
Location: SK6 SH1
WE SHIP INTERNATIONALLY
contrary to the Ebay
statement
that says we only ship to united states.
Contact us for shipping quotes
International purchases: A documentation processing fee will be added to total purchase for items under 0.
Our company return policy is that our description is guaranteed and we will accept returns in the event an item is mis-described.
When communicating with us please use your own email address.  We want to know who we are communicating with and we cannot identify specific emails in our inbox using the ebay email system.
Send emails to heritageequipment AT gmail . com
The new ebay buyer protection program has inspired us to offer all of our items “as-is”.
This does not mean that you are buying a machine with deficiencies, known or unknown.
What it means is that some of our items will be tested and will include the results in the description and others will be untested but described accurately to the extent that is possible without actually powering up the machine.
In addition to this written description you will have the opportunity to view high quality photos of the item.
With these two sources of information you will have as much information as possible without being physically here to inspect the machine.
Feel assured that we will make a diligent effort to give you an accurate description of the equipment.
As a buyer you should be aware that you are buying an expensive piece of equipment at a greatly reduced price and as such you may have to deal with certain unknowns and defective components which were not known and could not be known without full scale setup and operation of the machine.
Our experience in dealing with many specialized pieces of equipment has proven this to be a rare occurrence however it is a risk inherent in buying used equipment.
The very few times we have had to deal with these issues we have been very helpful in resolving the problem.