13.5" double bend PLAIN Chrome Stick 6900 for Hurst shifters Chevy Truck Jeep CJ

Description

PLAIN chrome shifter stick #
6900
:
13.5" tall, bends ~3.5" forward and then curves back to end with knob above stub
See also similar sticks #4331 (3" taller) & #7236 (2.5" shorter)
3/8"-16 knob threads
Forged mild steel - case-hardened for toughness, chrome-plated for beauty
PLAIN sides - NO LOGO -
NOT a Hurst part!
Mating serrations
for Hurst stub mount are
stamped into left side
WARNING: Do not weld, bend, or modify a case-hardened part like this
as it will create a weak spot that can lead to catastrophic failure
Great for custom installations -
measure before you buy!
Mounts via
3/8" bolt holes spaced 7/8" apart
- fits any aftermarket Hurst stub
Many off-brand shifters use 8mm stick bolts - requiring
special adapter bolts
Mix parts carefully as
proper leverage ratio (throw length) requires matching stick length to stub fulcrum height
Stick length = 13.5"
(distance from mount to knob) - see swap bases for fulcrum options
Interchanges with Hurst #5386900
IF YOU ARE DOING A SWAP - application info is irrelevant once transmission is changed
- sit in vehicle with tape measure while studying
Hurst catalog - stick section
.
This stick fits the following external linkage Hurst shifters
for OE 4 speed transmissions - correct fitment requires the specified Hurst base & installation kit
(see
Hurst catalog)
:
3666901 for 1966-1970 Chevy Full Size car w/ 3 speed
3666901 for 1958-1965 Pontiac Full Size car w/ 3 speed
3666901 for 1969-1977 Chevy Truck (4x4) w/ 3 speed
3666901 for 1971-1975 Dodge & Plymouth Van w/ 3 speed
3666901 for many 1952-1977 Ford & Mercury car & truck w/ 3 speed
3916901 (unknown, may be misprint)
3918403 (unknown)
3918404 (unknown)
NOTE: These part numbers may be specific to the transmission, engine, or interior trim (console etc) and may not fit all models mentioned.
Intended for aftermarket Hurst shifters - most OE factory shifters from this era (including Hurst) are NOT compatible with a bolt-on stick; they use a different connection.
This stick also fits the following Hurst & Core internal rail shifters -
matching base required, not compatible with stock shifters
(see complete kits):
3912006 Blackjack shifter for 1955-1957 Chevy w/ TKO
3913007 Blackjack shifter for 1955-1957 Chevy w/ Magnum
3915045 for 1982-1986 Jeep CJ w/ T4 or T5